This SuFeng catalog entry is labeled Samsung INR21700-45T. The exact cell marking and approved specification for a currently offered production lot have not been confirmed on this listing. Do not use the catalog label alone to set pack voltage, charging, current or thermal limits.
INR21700-45T: independently measured reference
Batemo’s Cell Explorer reports 4.41Ah measured capacity and 3.66V mean voltage for a physical sample identified as Samsung SDI INR21700-45T. Batemo states these are its own bench measurements, not datasheet values. Its C/10 capacity method discharges a tested sample at 25°C from full charge to the cell’s lower voltage limit under free convection. This result describes Batemo’s sample and method only; it does not establish the capacity, voltage rating, current limit or revision of cells offered by SuFeng.
| SuFeng catalog model label | Samsung INR21700-45T; verify against the supplied cell marking |
|---|---|
| Third-party test result | Batemo sample: 4.41Ah capacity and 3.66V measured mean voltage at C/10; independent measurements, not a manufacturer rating or offered-lot result |
| Manufacturer-document status | An accessible Samsung SDI CC4503F101 Version V0.1 copy is marked draft/confidential and says the official specification requires separate written confirmation. It is not used here as an approved lot specification. |
| Offered-lot limits | Confirm applicable approved capacity, voltage, charge/discharge current, thermal cut-offs, dimensions, revision and batch documents before engineering or purchase. |
For B2B technical matching
Send the required quantity, destination, intended application/current profile and document requirements. If available, include a clear photo of the offered cell marking. Availability, the applicable lot specification, packaging and delivery route are confirmed for the specific inquiry.
Batemo INR21700-45T independent test results · Batemo test-method definitions · Request technical matching and a lot-specific quotation


Reviews
There are no reviews yet.