Direct answer: Reliance INR21700-RS50 is a 21700 battery-cell model listed in the Sufeng catalogue with the catalogue identifiers 3.6V, 5000mAh, 21700 format. A model name and headline specification are not enough for pack approval. Confirm the exact manufacturer document, revision, test conditions, production lot, cell condition and order-specific availability before purchase or design use.
This article is a B2B verification guide for battery-pack manufacturers, integrators and professional buyers. It does not replace the manufacturer’s controlled datasheet, a safety review or pack-level validation.
Reliance INR21700-RS50 current model record
Reliance INR21700-RS50 is a 3.6V, 5Ah tabless 21700 cell in the manufacturer’s RS Power series. Reliance lists continuous discharge ≥8C without an 80°C cutoff and a separate maximum continuous discharge figure ≥70A. These are distinct manufacturer references; confirm the approved revision and offered-lot limits before pack design.
| Buyer check | Current catalogue identifier | Required confirmation |
|---|---|---|
| Exact model | Reliance INR21700-RS50 | Match the full code and suffix on the offered cells, packaging and documents. |
| Cell format | 21700 | Verify dimensions, terminal layout, insulation and pack-holder compatibility. |
| Nominal voltage | 3.6V in the catalogue title | Do not infer charge or discharge limits from nominal voltage. |
| Capacity | 5000mAh in the catalogue title | Confirm typical/minimum value and the test current, temperature and end voltage. |
| Catalogue groups | 21700 Battery Cells for B2B Pack Manufacturers, 5000-5499mAh, Cylindrical Li-ion Cells | Category placement is not an engineering approval or stock promise. |
| Availability | Confirm by inquiry | Confirm quantity, warehouse or dispatch route, lot, packaging and destination for the order. |
How to verify the datasheet before pack design
- Identify the controlled document. Confirm manufacturer, complete model code, document number, revision and date. A reseller table or wrapper image is not a controlled specification.
- Read capacity with its method. Record whether the value is typical or minimum and note charge method, discharge current, temperature and end voltage.
- Separate current definitions. Continuous current, pulse current and cycle-test current are different. Record duration, rest interval, cooling assumptions, temperature limit and cut-off voltage.
- Confirm voltage limits. Nominal voltage is not maximum charge voltage or minimum discharge voltage. Configure the charger, BMS and system controls from the applicable document.
- Check mechanical and thermal limits. Verify dimensions, mass, terminal condition, insulation, charge/discharge temperature ranges and pack heat removal.
- Match the offered lot. Request lot or date information, cell condition, packaging evidence and written confirmation that the supplied document applies to the offered product.
B2B order checklist for Reliance INR21700-RS50
- Application and intended duty cycle
- Series/parallel configuration, pack voltage and usable capacity
- Continuous and peak current with duration and rest interval
- Operating and storage temperature range
- Required quantity, packaging unit and delivery country
- Required datasheet, transport and quality documents
- Incoming-inspection method and acceptance criteria
For an accurate quotation, send these requirements together instead of requesting a price from the model name alone. Sufeng can then check the exact SKU, available lot, document set and delivery route for the inquiry.
Common sourcing risks
Do not treat cells as interchangeable because they share the 21700 format or a similar capacity. Model suffixes, document revisions, current limits, resistance methods, voltage limits and temperature conditions can differ. Do not mix models, lots, cell conditions or states of charge in a parallel group without a documented engineering basis.
Online claims for price, stock, grade, certification, warranty or delivery time can change. This guide does not confirm those terms. Ask for written order-specific confirmation and retain it with the approved bill of materials and incoming-inspection record.
Frequently asked questions
Does the catalogue title provide every design limit?
No. It helps identify the model, but charge voltage, discharge cut-off, current, temperature, resistance method, cycle test and safety conditions must come from the applicable controlled specification.
Can another 21700 cell replace Reliance INR21700-RS50?
Not automatically. Compare exact electrical, thermal, mechanical and document requirements, then validate the substitute in the completed pack.
Does this page confirm current stock or delivery time?
No. Availability, quantity, production lot, packaging, dispatch route and delivery timing must be confirmed for each inquiry and destination.
What should a buyer send for technical matching?
Send the exact model or acceptable alternatives, application, pack configuration, current profile, temperature range, quantity, destination and required documents.
Sources and related pages
- Model reference 1 — verify that the document or page applies to the exact offered revision and production lot.
- Reliance INR21700-RS50 3.6V 5000mAh Battery Cell product page — current Sufeng catalogue record and model-specific inquiry path.
- Browse 21700 battery cells — compare other listed models without assuming interchangeability.
- Request technical matching and a B2B quotation — include model, quantity, application, destination and document requirements.
Technical note: Product records and manufacturer documents can be revised. Confirm the current controlled specification and order terms for the exact product before purchase, transport or pack approval.
